John Deere tractor stickers up to 25 cm

STICKERS: JOHN DEER Dimensions: 25 cm

The price is for: 2 pcs. (for the right and left side)

The stickers are cut from self-adhesive foil from renowned manufacturers (resistant to weather conditions, frost, sun , mud, rain)

The stickers are cut using a plotter technique (cutting along the outline) according to the customer's individual order (pattern, size, color, etc.)

The stickers can be covered with clear varnish (CLARE ) non-solvent

All stickers have a transport foil, so they are easy to stick

The sticker is the black part of the graphics, any white spaces in the graphics below are the background, i.e. the surface on which the graphics are pasted after sticking only elements will be cut from foil, without background

After purchase, you must provide:

Pattern number

Color of stickers

If no if you provide a color pattern or size, you will receive the pattern and color from the thumbnail of the maximum size from the auction

The actual colors may differ slightly from the colors in the photo

Stickers suitable for agricultural machines such as: tractor tractor JOHN DEERE bison combine harvester

APPLICATION INSTRUCTIONS:

Clean and degrease (e.g. gasoline) the surface on which the sticker will be glued.

Press the sticker against the transport foil with a squeegee, making several sliding movements back and forth.

Gently peel off the backing paper from the transport foil with the sticker . Do it from as wide an angle as possible. If the sticker does not come off the paper, press it against the transfer foil again and try again.

To avoid air bubbles, stick the sticker starting from one side. Be careful not to stick the entire sticker at once. Then gradually press the transfer foil with a squeegee until it reaches the other side of the sticker. Press the entire sticker again with a squeegee.

Slowly and carefully peel off the transport foil at a large angle. Make sure that all elements are glued well and that the transport foil does not come off. If this happens, stick this part back on and press firmly.

The recommended gluing temperature is above +10 °C. The adhesive achieves 100% adhesion 24 hours after application. Do not wash the surface for 48 hours after applying the sticker.